Installing wireless router Belklin

Home » Business » Installing wireless router Belklin
Business, Small Business No Comments

* Background

* Approach

* Transcendence

* Framework

* Objectives

* Procedure

* Definition of Terms

* Conclusion

* Bibliography

Introduction

A router is a device that routes traffic from a network connected to one of its ports connected to another network in another of its ports. The router is a device that works on a network.

For this you need:

– Knowing the destination address: where does the information that needs to be routed

– Identify sources of information to be routed: What is the origin of information

– Discover the routes: What are the possible initial routes, or paths, to the destinations of interest

– Select routes: What is the best way for the required destination

– Maintain and verify routing information: Is the information on the way to the destination, date

Routing information that the router gets from the network administrator or other routers, places it in its routing table. The router will be sent to this table to decide which interface sends the information based on their destination address. If the destination network is directly connected, the router already knows which interface to use. If the destination network is directly connected, then the router must learn the best route may be used to send packets. This information may learn of the following ways:

– Entered manually by the network administrator (static routing)

– Collection via dynamic routing processes enabled on routers.

WIRELESS ROUTER INSTALLATION BELKLIN (WIRRELES G)

Background

Package 1.1Contenido.

* Belkin Wireless G Router.

* Quick Installation Guide.

* CD with software Belkin Easy Install with manual.

* Cable RJ45 Ethernet Networking Belkin.

* Power supply.

1.2. System Requirements.

* Internet Connection broadband like cable modem / DSL connection with RJ45 (Ethernet).

* At least one computer with a network interface adapter installed.

* Networking protocol TCP / IP installed on all computers.

* RJ45 Ethernet Network Cable.

* Internet Browser.

1.3. System requirements for simple installation software.

* A PC running Windows 98SE, Me, 2000 or XP or a Mac with Mac OS 9.x or OS X.

* 64MB of RAM minimum.

* Internet Browser.

The router is designed to be placed on a desktop. All cables exit from the rear of the Router for better organization and utility. The LED indicators are easily visible on the front of the router to provide information about the activity and status of the network.

1.4. LED Power / Ready

When you apply power to the Router or restart it, takes a short period of time while booting the router. During this time, the LED Power / Ready blink. When the Router has completely booted up, the Power LED / Ready SOLID light, indicating the Router is ready for use.

1.5. LED wireless network.

1.6. LEDs connected computers

These LEDs are labeled with numbers from 1 to 4 and correspond to the numbered ports on the back of the router. When a computer is properly connected to one of the LAN ports on the back of the router, the LED will light. GREEN means a device is connected 10Base-T and amber means that a device is connected 100Base-T. When information is being sent through the port, the LED blinks rapidly.1.7. Modem status LED.

This LED lights green to indicate that your modem is properly connected to the router. Flashes quickly when information is being sent through the port between the router and the modem.

1.8. LED Internet.

This unique LED shows you when the router is connected to the Internet. When the light is OFF, the router is not connected to the Internet. When the light is flashing, the Router is attempting to connect to the Internet. When the light is GREEN, the Router is connected to the Internet. If using the “Disconnect after x minutes” (Disconnect after x minutes), this LED is particularly useful for controlling the connection status of your router.

1.9. Outlet.

Connect this jack to the power supply of 5V DC attached.

1.10. Computer connections (ports for wired computers): BLUE

Connect your computers wired (non-wireless) computers to these ports. These RJ45 ports are auto-negotiating 10/100 and automatic linking to use standard Ethernet UTP cable category 5 or 6. The ports are labeled with numbers from 1 to 4. These ports correspond to the numbered LEDs on the front of the router.

1.11. Connecting the modem (Modem Port) – GREEN.

Modem connection (WAN port): GREEN This port is for connecting your cable modem or DSL. Use the cable supplied with your modem for connecting the same to this port. Using the supplied cable with the cable modem can cause malfunctions.

1.12. Reset button.

The button “Reset” (reset) is used in rare cases when the Router may function improperly. Rebooting the router will restore normal operation while maintaining the programmed settings. You can also restore the factory default settings using the reset button. Use the restore option in instances such as when you have forgotten your personal password.

* Restarting the Router

Press and release the reset button. The lights on the Router will momentarily flash. Light Power / Ready blinks. When the Power light / Ready solid again, the reset is complete.

* Restoring the factory default settings

Press and hold the reset button for at least ten seconds and then release. The lights on the Router will momentarily flash. Light Power / Ready blinks. When the Power light / Ready to solid again, the reset is complete.

Approach

2.1. Product Features

Within minutes you can share your Internet connection and network your computers. Below is a list of features that make your new Belkin Wireless G Router an ideal solution for small office network or home.

2.2. Works with PC and Mac (R) computers.

The router supports multiple networking environments including Mac OS (R) 9.x, X v10.x, AppleTalk (R), Linux (R), Windows (R) 98, Me, NT (R), 2000, and XP, and others. All you need is an Internet browser and a network adapter that supports TCP / IP (the standard language of the Internet).

2.3. LED indicators on the front panel.

The front panel LEDs lit Router indicate which functions are active. At a glance you can see if your router is connected to the Internet. This feature eliminates the need for advanced software and status-monitoring procedures.

2.4. Advanced user interface via the Internet.

You can configure the Router’s advanced functions easily through your web browser without having to install additional software on your computer. No need install disks and, what’s even better, you can make changes and perform setup functions from any computer on the network quickly and easily.

2.5. NAT IP Address Sharing.

Your router uses the method of network address translation (NAT) to share the single IP address assigned by your Internet service provider (ISP), thus avoiding the costs involved in the use of additional IP addresses to your account Internet services.

2.6. SPI Firewall.

Your router is equipped with a firewall that protects your network from a wide array of common hacker attacks including IP Spoofing (IP masquerading), Land Attack, Ping of Death (PoD), Denial of Service (DoS, denial of service), logitud IP with zero, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding.

2.7. The router features.

A network switch 4 port built that allows networked computers to share printers, data and MP3 files, digital photos and more. The switch features automatic detection so it will adjust to the speed of connected devices. The switch will transfer data between computers and the Internet simultaneously without interrupting or consuming resources.

2.8.Compatibilidad Plug-and-Play (UPnP) Universal.

The UPnP (Universal Plug-and-Play, Plug-and-Play Universal) is a technology that offers seamless operation of voice messaging options, video messaging, games and other applications that support UPnP.

2.9. Supports VPN pass-through.

If you connect from home to your office network using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router and to your office network.

2.10. Host Configuration Protocol (DHCP) built.

The Host Configuration Protocol (DHCP) guarantees incorporated easiest possible connection to a network. The DHCP server will assign IP addresses to each computer automatically so that it is not necessary to configure a complicated networking.

2.11. Easy Install Wizard.

The Easy Install Wizard provides the necessary support for configuring your router. This automatic software determines for you network settings and configures the router to connect to your Internet service provider (ISP). Within minutes, your wireless router will be up and running on the Internet.

ATTENTION: The simple installation software is compatible with Windows 98SE, Me, 2000, XP and Mac OS 9.x and Mac OS X.

If you use another operating system, the wireless router can be configured using the alternative method described in this manual.

2.12. 802.11g Wireless Access Point integrated.

802.11g is an exciting new wireless technology that achieves data transmission speeds of up to 54Mbps, nearly five times faster than 802.11b.

2.13. MAC address filtering.

For added security, you can configure a list of MAC addresses (unique client identifiers) that are allowed to access your network. Each computer has its own MAC address. Simply enter these MAC addresses into a list using the user interface via the Internet and may control access to your network.

Transcendence

By following our simple installation instructions, you can use your Belkin Home Network to:

* Share Internet connection speed with all the computers in your home.

* Share resources such as files and hard drives among all the connected computers in your home.

* Share a single printer with the entire family.

* Share documents, music, video and digital images.

* Store, retrieve, and copy files from one computer to another.

* Play games online, check email and chat simultaneously.

Advantages of a Wireless Network

* Mobility: no longer need a “computer room”, but you can work anywhere.

* Part within your wireless range with a PC or networked laptop.

* Easy installation: the Easy Install Wizard Belkin lets you easily configurations.

* Flexibility: set up and access printers, computers and other network devices from anywhere in your home.

* Easy expansion: the extensive range of networking products from Belkin allows you to expand your network.

* Include devices such as printers and gaming consoles.

* No wiring you can spare the expense and hassle of retrofitting Ethernet cabling throughout the home or office.

* Widespread industry acceptance: choose from a wide range of interoperable networking.

Placement of your router for optimal performance Important Factors for Placement and Setup Your wireless connection will be stronger the closer you are to your computer from your router. The normal operating range of your wireless devices indoors is between 30 and 60 meters.

In the same way, your wireless connection and performance will degrade somewhat as the distance increases between the devices connected to your wireless router and connected devices. You may appreciate it or not. If it moves further away from your router, may decrease your connection speed. Factors that can weaken signals simply by getting in the way of radio waves of its network, are metal appliances or obstructions, and walls.

If you have concerns about your network’s performance that might be related to factors range or obstruction, try moving the computer to a position of 3 feet away from your wireless router to see if the problem is due to distance. If issues persist even at close range, please contact technical support service from Belkin.

Caution: While some of the items listed below can affect network performance, they will not prohibit your wireless network to function. If you are concerned that your network is not operating at its maximum effectiveness, this checklist may help.

3.1. Positioning the wireless router:

Place your Router, the central connection point of your network, as close to the center of your wireless network devices.

To achieve the best wireless network coverage for your “wireless clients” (ie, computers with wireless network cards for notebook, wireless network cards for desktop and USB wireless adapters Belkin):

* Make sure your antenna network router are located parallel to each other and are positioned vertically (toward the ceiling). If your router is positioned vertically, point the antennas at the ceiling to the maximum extent possible.

* In multistory homes, place the Router on the floor closest to the center of the house. This may mean placing the wireless router in one of the upper floors.

* Try not to place the Router near a cordless phone.

3.2. Avoid obstacles and interference.

Avoid placing your Router near devices that may emit radio “noise” of radio emission, such as microwave ovens. Dense objects that can inhibit wireless communication include:

* Refrigerators

* Washers and / or dryers

* Metal cabinets

* Large aquariums

* Tinted windows, UV metallic base.

If your wireless signal seems weak in some spots, make sure that these objects are not blocking the signal’s path (between your computers and router).

3.3. Cordless Phones.

If the performance of your wireless network is impaired after taking into account the above issues, and you have a cordless phone:

* Try moving cordless phones away from your router and your wireless-enabled computers.

* Disconnect and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s information). If this fixes the problem, your phone may be interfering.

* If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your wireless router to channel 11. Refer to the user manual of your phone for detailed instructions.

* If necessary, consider switching your wireless phone a 900MHz.

3.4. Choose the channel “calmer” for your wireless network.

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with your network.

Use the inspection capacity of the location of your wireless utility of your wireless card or adapter to locate any other wireless networks (see the manual of your wireless adapter), and move your Router and computers to a channel as far away as possible from the rest of networks.

* Experiment with more than one of the available channels to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices.

* For networking products Belkin wireless, use the detailed inspection of the location and wireless channel information included with your wireless network card. Refer to the user manual of your network card for more information.

These guidelines should allow you to cover the largest coverage area possible with your router. If you need to cover a wider area, we recommend the extension module / G Wireless Access Point Belkin.

3.5. Secure connections, VPNs, and AOL Secure connections

They usually require a user name and password and are used where security is important.

Secure connections include:

* Connections Virtual Private Network (VPN) connections, often used to connect remotely to an office network.

* The “Bring Your Own Access” (bring your own access), America Online (AOL), which lets you use AOL through broadband provided by another cable or DSL service.

* Most Web pages, online banking services.

* Many commercial websites that require a username and password to access your account.

Secure connections can be interrupted by a computer’s power management of the computer that it to “go to sleep”.

The simplest solution to avoid this is to connect rerunning the VPN or AOL software, or by re-logging into the secure web-page.

A second alternative is to change the settings for power management of your computer, so you do not go to sleep, however, this may not be appropriate for portable computers. To change your settings power management in Windows, see “Power Options” (Power Options) in the Control Panel.

If you continue to have difficulty with Secure Connections, VPNs, and AOL, review the steps above to ensure you have addressed these issues.

Framework

4.1. Using the advanced user interface through Internet

Using your Internet browser, you can access the advanced user interface of the router. In your browser, type “192.168.2.1” (do not type anything else such as “http://” or “www”) and then press the “Enter” (Intro). You will see the main page of your router in the browser window.

4.2. LAN settings display.

By clicking on the header of the tab “LAN Setup” (1) access the corresponding page header. Here you can find a brief description of the functions. To view the settings or make changes to any of the LAN settings, click on “LAN Settings” (Settings LAN) (2), and to see the list of computers, click on “DHCP client list” (List of clients DHCP) (3).

4.3. Changing the LAN Settings.

All settings for the internal LAN setup of the Router can be viewed and changed here.

4.3.1 IP Address (IP Address). (1)

The “IP address” is the internal IP address of your router. The default IP address is “192.168.2.1”. To access the advanced setup interface, type this IP address into the address bar of your browser. This address can be changed if necessary. To modify the IP address, enter the new IP address and click “Apply Changes” (Apply changes). The IP address selected will be a non-routable IP.

4.3.2. Subnet Mask (Subnet Mask). (2)

No need to change the subnet mask. This is a unique, advanced feature of your Belkin Router. You can change the subnet mask if necessary, but do NOT make changes to the subnet mask unless you have a specific reason to do so. The default setting is “255.255.255.0”.

4.3.3. DHCP Server (3)

The DHCP server function greatly simplifies the task of configuring a network assigning IP addresses to each computer on the network automatically. The default setting is “On” (On). The DHCP server can be turned OFF if necessary, however, to do so you must manually set a static IP address for each computer on your network. To turn off the DHCP server, select “Off” (Off) and click “Apply Changes” (Apply changes).

4.3.4. IP Pool (IP set). (4)

The range of IP addresses set aside for dynamic assignment to the computers on your network. The default range is 2-100 (99 computers). To change this number, you can do so by entering a new IP address start and end and clicking “Apply Changes” (Apply changes). The DHCP server can assign 100 IP addresses automatically. This means that you fail you can specify an IP address pool larger than 100 computers. For example, if comienz for 50 to end at 150 or lower so as not to exceed the limit of 100 clients. The starting IP address must be less in number than the ending IP address.

4.3.5. Lease Time (lease times). (5)

The amount of time the DHCP server will reserve the IP address for each computer. We recommend leaving the maintenance time configuration in “Forever” (Forever). The default setting is “Forever” (Forever), which means that every time the DHCP server assigns an IP address to a computer, the IP address will not change for that particular computer. If you set the lease times for shorter intervals such as one day or one hour, frees IP addresses after the specified period of time. This also means that the IP address of a specific computer can change

over time. If you set any of the other advanced features of the Router such as DMZ or client IP filters, these are dependent on the IP address. For this reason, it is desirable for you to change the IP address.

4.3.6. Local Domain Name Domain Name (local). (6)

The default setting is “Belkin”. You can set a local domain name (network name) for your network. No need to change this setting unless you have a specific advanced need to do so. Network can give the name you want such as “MY NETWORK”.

4.4. Viewing the list of DHCP clients.

You can view a list of computers (known as clients) that are connected to your network. You can view the IP address (1) the computer, the host name (2) (if one has been assigned to the computer), and MAC address (3) of the network interface card (NIC network interface card) of computer. Pressing the “Refresh” (Update) (4) will update the list. If there have been changes, the list will be updated.

4.5. Configuring the wireless network settings.

The tab “Wireless” (Wireless) lets you make changes to the wireless network settings. From this tab you can make changes to the wireless network name (SSID), operating channel and security settings in the encryption and configure the router to be used as an access point.

4.6. Changing the Wireless Network Name (SSID)

To identify your wireless network, a name called the SSID (Service Set Identifier, Service Set Identifier). The router’s default SSID is “belkin54g”. You can change this to anything you want or you can leave it unchanged. If there are other wireless networks operating in your area, you should make sure that your SSID is unique (does not match that of another wireless network in the area). To change the SSID, type in the SSID field (1) the SSID you want and click “Apply Changes” (Apply Changes) (2). The change is immediate. If you change the SSID, your wireless-equipped computers must be configured to connect to your new network name. See the documentation for your wireless network adapter for information on making this change.

4.7. Protect your Wi-Fi (R).

Are ways to maximize the security of your wireless network and protect your data from prying eyes. This section is for the user in a small office, home office and home. At the time of publication of this manual are available three encryption methods.

4.7.1. WEP (Wired Equivalent Privacy)

The WEP (Wired Equivalent Privacy, privacy equivalent to cable) is a common protocol that adds security to all wireless products support Wi-Fi. The WEP is designed to provide wireless networks to a level of privacy protection equivalent to that of a wired network.

4.7.2. WPA (Wi-Fi Protected Access, Wi-Fi Protected Access).

The WPA (Wi-Fi Protected Access, Wi-Fi Protected Access) is a new Wi-Fi standard designed to improve the properties of the WEP security. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support WPA. These updates will be available on the website of your wireless carrier. There are two types of WPA security: WPA-PSK (no server) and WPA (with radius server).

4.8. Configuring WPA/WPA2

* Select “WPA/WPA2-Personal (PSK)” drop down menu as “Security Mode”.

* Select “WPA-PSK” to use only WPA, or “WPA2-PSK” to use WPA2 authentication only, or you can select “WPA-PSK + WPA2-PSK” to use WPA and WPA2 as the authentication type.

* Enter your pre-shared key. Can consist of between eight and 63 characters long letters, numbers or symbols. This same key must be used on all clients to install. For example, your PSK might be something like this: “Smith family network key”.

* Click on “Apply Changes” (Apply changes) to finish. You must now set all clients to match these settings.

Installing guest access (optional) The pre-shared key allows guest users only guests have access to the Internet to restrict access to your network and files from your PC. Enter the pre-shared key for guest access. It can be from eight to 63 characters and letters, numbers and symbols. Click “Apply Changes” (Apply changes) to finish.

4.9. Configuring the firewall

Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks, including:

o IP Spoofing

o SYN flood

o Land Attack

o UDP flooding

o Ping of Death (PoD)

o Tear Drop Attack

o Denial of Service (DoS, Denial of Service)

o ICMP defect

o IP with zero length

o RIP defect

o Smurf Attack

o Fragment flooding

o TCP Null Scan

The firewall also masks common ports that are frequently used to attack networks. These ports appear as “Stealth” (Invisibles), which means that for all intents and purposes, these ports do not exist to a potential hacker.

If needed, you can turn off the firewall, but is recommended to leave the firewall enabled. Disabling the firewall protection will not leave your network completely vulnerable to attacks from hackers, but you should leave the firewall enabled.

4.10. Establishment of Client IP Filters

The router can be configured to restrict access to the Internet, e-mail or other network services at specific days and hours. The restriction can be configured for a single computer, a range of computers, or multiple computers. To restrict Internet access to a single computer, enter the IP address of the computer you want to restrict access to in the IP fields (1). Then enter “80” in both the port fields (2). Select “Both” (Both) (3). Select “Block” (Block) (4). You can also select “Always” (always) to block access permanently. Select the start day on the top (5), the start time in the upper part (6), the day of the bottom end (7), and the end time (8) at the bottom. Select “Both” (Both) (9). Click “Apply Changes” (Apply changes). The computer IP address specified will now be blocked Internet access in times set. Note: Make sure you have selected the correct time zone “Utilities> System Settings> Time Zone” (Utilities> System Settings> Time Zone).

Objectives

– Know what a router

– Be able to connect to a router via its console port, and see the different ways to access the router.

– Light a router and recognize the normal sequence of the router.

– Use the command interpreter to communicate with a given operating router.

– Know how to characterize sw and hw a specific router.

– Perform a basic configuration of a router.

Procedure

6.1 STEP 1: Execution Software Easy Install Wizard

1.1. Shut down any programs that are currently running on your computer.

1.2 Ensure that you have the following items on the computer that is currently connected directly to the cable modem or DSL. DO NOT CONNECT THE ROUTER AT THIS TIME.

o Quick Installation Guide

o CD with installation software with simple user manual Elkin

o The router

o The power supply of the router

o Cable RJ45 Ethernet Networking

1.3 Turn off any firewall or software to share the existing internet connection on your computer.

1.4 Insert the software CD with easy installation on your CD-ROM. The screen of the Easy Install Wizard will automatically appear on your screen after 15 seconds. Otherwise, select your CD-ROM drive from “My behoove” (My Computer) and double click on the file named “EasyInstall.exe” in the CD-ROM.

Welcome Screen

After inserting the CD into your CD-ROM, the screen wizard welcome. Make sure the router is not connected at this time. If you connected the router, plug your computer directly to the modem. Click “Run the Easy Install Wizard” when ready to continue.

Progress Screen

The wizard displays a progress screen each time a step is complete the installation. Whenever progress screen appears, click on “Next” (Next) when ready to continue to the next step.

Examining the configuration

The wizard will now examine the network settings of your computer and gather information needed to complete the router’s Internet connection. Once the wizard has finished examining your computer, click on “Next” (Next) to continue.

Screen localized multiple network adapters

This screen will appear if you have more than one network adapter installed in your computer. If you have more than one network adapter installed in your computer, the wizard will need to know which adapter is connected to your modem. Select from the list the network card that is connected to your modem and click “Next” (Next). If not

Sure which adapter to choose, select the top of the list. If you select a wrong adapter this time, will be able to select a different one later.

6.2 Step 2: Install the hardware

The wizard will guide you to connect the router to your computer and your modem. Follow the steps on the screen using the pictures as a guide.

2.1 This step instructs you to locate the cable connected between your modem and the network port of your computer. Disconnect the cable from the computer and connect to the green port on the router. Click “Next” (Next) to continue.

2.2 This step instructs you to locate the blue cable that comes attached to your router. Connect one end of the cable into any of the ports on your router BLUE. Connect the other end of the cable into the network port of your computer. Click “Next” (Next) to continue.

2.3 This step instructs you to locate the power supply that comes attached to your router. Connect the small connector of the power supply to the power port on your router. Connect the power supply to an electrical outlet available. Click “Next” (Next) to continue.

2.4 This step instructs you to watch as lights on the front of your router. Make sure the appropriate lights are ue NCENDIDAS For details, see the software and simple installation wizard on your computer screen. Is Click (Next) to continue.

6.3 Step 3: Checking the connection

3.1 Once you have completed your router connection, the wizard will check the connection to the router and then determine what kind of Internet connection and you have.

3.2 requires a user name and password

If you have a type of connection that requires a user name a password, the wizard resolicitar entering your username and password your connection type does not require username and password, you will not see this screen. Your login and provide your contrasease the Internet service provider (ISP). If you must enter a user name and password to connect to the Internet, enter here such username and password. Your username looks similar in character “jdoe [at] miISP.com” or simply “jdoe”. The name of the optional services and rarely required by your ISP. If not conocesu service name, leave enblanco. After entering the information, click “Next” (Next) to continue.

3.3 Configuring Wireless

This step is optional. N Click “Next” for saltearlo.Utilizando this step can customize your settings if desired redinalmbrica. Follow the onscreen instructions to complete this step, click “Next” to continue.

6.4 STEP 4 Secure your network

4.1 After the connection is established, the installation wizard prompts you to select the desired level of security.

4.2 WEP and WPA are the two options deseguridad. If you prefer not to osi security installation later, click the radio button next estal “NONE” (None) and click “Next” (Next).

4.3 The security option Wi-Fi Protected Access (WPA) has a configuration with two passwords.

You can select a password that provides full access to the grid and other solamentecomo GUEST password to access (Internet only). Click “Next” (Next).

4.4 The security installation is now complete. Click “Next”

(Next) to configure.

6.5 Step 5 Configuring the router

The wizard will now transfer all information to the router configuration. This will take approximately one minute. During this time, do not turn off the router or computer. The router will reboot itself at the end of this step.

5.1 Checking the Internet The wizard will now check the Internet conexiona. This may take a few minutes. It posibleque the wizard does not detect a conexininmediatamente. In this case, keep trying repeatedly. The “Connected” light on the front panel of the router will flash during this time. Please wait while the process takes place.

5.2 Completed once the Internet connection has been completed, the wizard prompts you to complete. When the Online LED on the front panel of the router turns green, it means that the router is connected to the Internet.

Your router is now connected to the Internet. You can begin surfing by opening your browser and going to the website you want. Congrats. You have finished installing your new Belkin Router. You are ready to configure the other computers in the house. You can add computers to your router whenever you want.

Definition of Terms

1) Router: A device that connects one or more computers or even a local area network (LAN) to the Internet through a phone line with ADSL service.

2) Gateway: is the one that provides output to the outside to a local network.

3) ADSL MODEM: Modula signals sent from the local network that can be transmitted over the ADSL line and demodulates the signals received by it for the computers on the LAN can interpret. In fact, there are configurations consisting of a DSL modem and a router to do the same function as an ADSL router

4) Wireless Access Point: They allow communication via Wireless (wireless) with local network equipment.

5) LED: When you apply power to the Router or restart it,

takes a short period of time while starting router.

6) TCP / IP: Internet is based, and is used to link computers running different operating systems, including PCs, minicomputers and mainframe computers on local area networks (LAN) and wide area (WAN)

7) LAN: A local area network, local area network or LAN (Local Area Network English) is the interconnection of several computers and peripherals. Its extension is physically limited to a building or an environment of up to 200 meters.

8) WAN: Wide Area Network (WAN Wide Area Network or, in English) is a type of computer network capable of covering distances from about 100 to about 1000 km, giving service to a country or a continent.

9) IP Address: This is the number that identifies each device on a network with IP protocol

10) IP protocol: a protocol used for communication of data over a network.

Conclusion

Currently the router is one of the most important devices to interconnect local networks either / LAN or wide area (WAN) since it is an electronic device that manages traffic between networks. Decisions as to where to mail the are made based on information from the network layer and routing tables.

Bibliography

1. INSTALLATION MANUAL BELKIN ROUTER (WIRRELES G)

 

 

 

Made by:

Ariel Paz e Silva

Republic of Panama

Ministry of Education

National Youth and Adults

Evening High School Officer Resume

Computer System Research

La Chorrera, November 13, 2008